Routing Problem with Sophos XG

Hi Oliver,

Thank you for your query, So you have RED tunnel ? 
Which wants to communicate over the IPsec tunnel ?

Under the IPsec connection have you mentioned the RED network under the local network and on the remote location RED network as the remote network?

Do you have a rule in place for the traffic RED to VPN and VPN to RED ?

Can you Monitor traffic using Packet Capture Utility : https://support.sophos.com/support/s/article/KB-000035761?language=en_US ?

And from the console, can you verify whether the traffic is going into the IPsec connection ?
from the console>  system diagnostics utilities route lookup <ipsec network ip address> 

Hello,

yes i have red tunnels. 

I want to communicate from a notebook in a RED-brunch office to destination in one/all IP-Sec-connections. The XG will not route the traffic from the Red to the destination.

Thanks. I have only made rules RED to LAN and RED to WAN and Lan to RED.

Thats seems to be my problem.

Hello,

yes i have red tunnels. 

I want to communicate from a notebook in a RED-brunch office to destination in one/all IP-Sec-connections. The XG will not route the traffic from the Red to the destination.

Thanks. I have only made rules RED to LAN and RED to WAN and Lan to RED.

Thats seems to be my problem.

As it is an IPsec connection, have you created a rule for RED to VPN and VPN to RED rules ?