Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 41 subscribers
  • Views 1356 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Switch APX530 from SG to XGS

Andreas Kossmann

Hello,

i have a big problem. At the Moment i have a migration from SG UTM 9 tu Sophos XGS.

Everthing works fine, except Wireless.

I disconnected the old Sophos UTM and Connected the Sophos XGS to the LAN. The APX AccessPoints immediatly appears in the list of pending APs.

But when i accept one of them, it remains as inactive and the led remains red. 

I tested this another time in testing enviroment. I works without problems. But now in production the access point never go active or receive the configuration. I don't know how i can fix this.

Is there another way how it has to be done?

Thanks in advanced and sorry for my english

Andreas



This thread was automatically locked due to age.
Parents
  • +1

    Hello Andreas,

    could you connect and then remove the AP from the previous configuration on the old firewall?

    Maybe this cleans things up.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • +1

    Hello Andreas,

    could you connect and then remove the AP from the previous configuration on the old firewall?

    Maybe this cleans things up.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML