This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL Vpn gateway

Dear frds,

i have configured the ssl vpn for remote access port 2 & port 3 are my wan port ( i have two ISP) ssl vpn is connecting in port 2( network 1 ) frequently port 2 gateway down due to heavy traffic for few sec the its reconnecting again, but here am trying to configure the ssl vpn in port 3 (network 2) after configure i cant able to connect the ssl vpn , Vpn is connecting with the network 1.Pls help out to solve the issue.

This thread was automatically locked due to age.

Top Replies

FormerMember over 3 years ago +1

Hi and thanks for reaching out to Sophos Community. If you want to use the Second ISP which is stable (Port3) You can configure override hostname in the SSL VPN settings and put your Port 3 ISP's IP address…

0 FormerMember over 3 years ago

Hi and thanks for reaching out to Sophos Community.

If you want to use the Second ISP which is stable (Port3) You can configure override hostname in the SSL VPN settings and put your Port 3 ISP's IP address there.

Go to VPN > Show VPN Settings > Override Hostname || set your stable ISP's IP here, Hit save and re-download the SSL VPN configuration file and connect the VPN.

After this, your SSL VPN will always connect to the added IP address.

Thanks,
Cancel
Vote Up +1 Vote Down

Cancel
0 oriens global over 3 years ago in reply to FormerMember

ok ,let me try it and update here ,Thank u
Cancel
Vote Up 0 Vote Down

Cancel
0 oriens global over 3 years ago in reply to oriens global

i tried overridde ..its not working
Cancel
Vote Up 0 Vote Down

Cancel
0 FormerMember over 3 years ago in reply to oriens global

Did you re-download the config file for the user?

Can you share the snapshot of your network settings, SSL VPN settings, and the error that you get in the SSL VPN Client while connecting?
Cancel
Vote Up 0 Vote Down

Cancel
0 oriens global over 3 years ago in reply to FormerMember

yes re downloaded and checked the config file also ..then to its not connecting
Cancel
Vote Up 0 Vote Down

Cancel
0 oriens global over 3 years ago in reply to oriens global

network settings is wanlink manager
Cancel
Vote Up 0 Vote Down

Cancel
0 oriens global over 3 years ago in reply to oriens global
Cancel
Vote Up 0 Vote Down

Cancel
0 FormerMember over 3 years ago in reply to oriens global

You will need to put your Stable ISP's IP address in the Override Hostname Field and connect after re-downloading the config file
Cancel
Vote Up 0 Vote Down

Cancel
0 oriens global over 3 years ago in reply to oriens global
Cancel
Vote Up 0 Vote Down

Cancel
0 oriens global over 3 years ago in reply to FormerMember

yeah i add the stable network and i have tried ..before posting i ahave removed the ip
Cancel
Vote Up 0 Vote Down

Cancel