Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 37 subscribers
  • Views 955 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DoS - how to exclude one network or selected devices?

rfcat_vk

Hi folks,

looking for some help with DoS settings.

Suddenly my security cameras are failing DoS UDP and ICMP flooding. I have disabled DoS fro UDP and ICMP to allow the cameras to work.

What I have tried and failed with.

1/. new application for viewing the cameras, no positive affect

2/. change the DoS UDP setting to larger values, went as high as 12500, no positive affect

3/. added many DoS bypass rules for 5 external networks using large masks and two internal networks

4/. setup DoS bypass for incoming traffic, no polite affect.

So, the question is how do I exclude 4 devices from DoS protection or in the worst case the entire IoT network?

Ian



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to FormerMember

    Hi Yash,

    I tried the * setting which I had configured wrong and I had not gone small enough with my masks, but still does not bypass DoS settings.

    I will conduct some more experiments in the morning after I have tested the reports fix.

    Ian

    XG115W - v20.0.1 MR-1 - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
  • 0 in reply to rfcat_vk

    Hi,

    I tried the DoS rules again this morning with the bypassed and blocked traffic after short time. If I only access one camera the connection works with DoS enabled.

    I am accessing the cameras from the iPad om ny iPhone hotspot. If I increase the DoS settings to 12000 for both directions then everything works. I also found this morning that my VoIP service cuts out after a short time just like the cameras when I have DOS UDP enabled at 2500 in both directions.

    The DoS bypass does not work. I will experiment som more when I have exclusive use of the XG this afternoon.

    Ian

    And then there is the question about why do I need to make changes to something that worked well for many months and numerous XG upgrades, but suddenly after MR-5 my DoS settings are all wrong?

    The DoS bypass rules.

    XG115W - v20.0.1 MR-1 - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML