XG 125 - 18.0.2 MR-2 PPoE Setup Help


I am setting up this for first time and first thing I need to sort out is how to make XG125 dial up by itself. 

TP link router does the PPOE where BTU is Huawei device directly connects to the fiber network.


Now when I am connecting XG125, I want the PPoE to be taken up by the firewall  itself. I tried to setup the PPoE settings within XG125 , didnt work. I couldn't find where to start tracing it.

Meanwhile I got the PPoE log from TP-Link router. Anyone can suggest what is the correct setup so that XG125 will be able to establish dial up. 

  • Hi,

    are you talking about a dialup using dial tone or are you talking about a PPPOE connection. On the XG the PPPOE connection is setup in the WAN interface.


    V18.0.x - e3-1225v5 6gb ram with 4 ports - 20w. 
    3 AP55s and 2 APX120s having a holiday until software update is released.
    If a post solves your question use the 'This helped me' link.
  • Thanks for your reply.

    You are right, I want XG to do the PPoE, eliminate the TP Link router. 

    Above is my WAN link config, trying to connect PPoE. didn't work. Is there any place in XG to check log of this connection ? 

Reply Children