Thread Info
  • State Suggested Answer
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 11 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 2407 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

upgrade sophos xg 430 rev 1 with SFOS 17.5.14 MR-14-1 to SFOS 18.0.3 MR-3 failed

hakim BOUALEM 
We have a sophos xg 430 rev 1 appliance with version SFOS 17.5.14 MR-14-1 the appliance offers me to update the appliance but 
when it is applied the appliance reboots and remains with the same version (SFOS 17.5.14 MR-14-1).

I searched in log and I did not find anything.

Knowing that this update is applicable according to
 docs.sophos.com/.../rn_UpgradeInformation.html

Thinks


This thread was automatically locked due to age.
Parents
  • 0

    hello,

    thank you for your reply
there is no error in /log/migration.log 
    regards,
  • 0 in reply to hakim BOUALEM 
    when the update is applied I see these errors on my screen using the console cable
    and at the end the appliance restart with the old firmware SFOS 17.5.14 MR-14-1


    Starting 18_0_3_457.
    FIRMWARE LOADER (press <enter> to display list of images)
    MD5 of /tmp/v18installer/18_0_3_457=3ef9908d9eb7af756bc43bd2660f928c
    MD5 of /tmp/v18SFLoader/SFLoader=7c9573e74d0ffc20a454ee8d5ecb4336
    Taking backup of v17 Bootloader... v17 Bootloader backup Done
    Setting Disk signatures for v18 for single disk... Setting Disk signatures for v18 Done
    Appliance is switching/upgrading to v18 again
    Trying to read Boot partition offset from NVRAM...
    Boot partition offset not present in NVRAM, Creating required partitions and resizing signature partition.
    Checking signature partition and correcting errors if any...



    MA
    [   13.168510] ata3.00: cmd c8/00:08:00:c4:d3/00:00:00:00:00/e0 tag 27 dma 4096 in
    [   13.168510]          res 51/40:08:00:c4:d3/00:00:00:00:00/e0 Emask 0x9 (media error)
    [   13.213679] ata3.00: status: { DRDY ERR }
    [   13.225744] ata3.00: error: { UNC }
    [   13.262767] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [   13.282116] ata3.00: irq_stat 0x40000001
    [   13.293915] ata3.00: failed command: READ DMA
    [   13.307021] ata3.00: cmd c8/00:08:00:c4:d3/00:00:00:00:00/e0 tag 14 dma 4096 in
    [   13.307021]          res 51/40:08:00:c4:d3/00:00:00:00:00/e0 Emask 0x9 (media error)
    [   13.352182] ata3.00: status: { DRDY ERR }
    [   13.364242] ata3.00: error: { UNC }
    [   13.402760] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [   13.422102] ata3.00: irq_stat 0x40000001
    [   13.433901] ata3.00: failed command: READ DMA
    [   13.447005] ata3.00: cmd c8/00:08:00:c4:d3/00:00:00:00:00/e0 tag 5 dma 4096 in
  • 0 in reply to hakim BOUALEM

    Hello Hakim,

    Thank you for the logs.

    I think you would need to RMA the device, please open a ticket with Support. 

    When doing this please submit the log you showed me and the output of these commands:

    # grep "ata1" syslog.log.0 | grep -e "error\|fail" | head

    # grep "Command line: auto BOOT_IMAGE" syslog.log.0 | tail -n5

    # hdparm -i /dev/sda

    I think you might be affected by NC-61506

    Please share with me the Case ID once you open it!

    Regards,

     
    Emmanuel (EmmoSophos)
    Technical Team Lead, Global Community Support
    Sophos Support Videos | Product Documentation  |  @SophosSupport  | Sign up for SMS Alerts
    If a post solves your question use the 'Verify Answer' link.
  • 0 in reply to emmosophos

    This is interesting, I've had two XG's that have failed to update to v18 but from earlier versions of v17. They both, however, updated to 17.5.14 without a problem (which was the solution offered from Sophos Support). They are remote so it's not possible to see the console output - what's NC-61506?

    Regards

Reply
  • 0 in reply to emmosophos

    This is interesting, I've had two XG's that have failed to update to v18 but from earlier versions of v17. They both, however, updated to 17.5.14 without a problem (which was the solution offered from Sophos Support). They are remote so it's not possible to see the console output - what's NC-61506?

    Regards

Children
Unfiltered HTML