Hi all,
I have a side project where I have tried to use one of these:
https://ipc2u.com/catalog/tt2516-00c
To load XG Home - the unit has a Celeron CPU, 4Gb RAM and a Kingston SSD - all NIC Ports are Intel.
The issue I face is I can run the XG Home installer and it appears to work fine and I get to the music at the end where I need to remove the USB Boot device and reboot. As soon as this happens I get the Cannot Find Boot Device.
I have tried everything I can see and BIOS see's the SSD fine. The BIOS is pretty basic on this device and rfcat_vk suggested it was not waiting to find the SSD at Boot - I have no setting for this in BIOS.
Anyone have any suggestions on what I might try?
This thread was automatically locked due to age.