This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No hostname shown in IPv4 lease list

Hello all,

I have a strange issue here.
Although I have DHCP reservations and network definitions for my hosts, there's no hostname displayed for the clients in the DHCP lease list.

Please see the screenshots attached.

How do I display the hostname in the leases list?

Bjoern

This thread was automatically locked due to age.

0 RFCat_vk_01 over 10 years ago

Hi,
Please advise which version you are using.

I have just checked my UTM and you would appear to have identified a bug in the DHCP IPv4 lease table display.

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 10 years ago

Hi,
Were these created in a older version of the UTM, and then you upgraded to 9.1?
Or were they created in 9.1?

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 RFCat_vk_01 over 10 years ago in reply to BarryG

I should have also added my dhcp IPv4 lease table is empty while the IPv6 table has entries.
The static table has text advising that the entries are managed by network definitions where as the IPv4 table used to have this text but no longer does.

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 Razorblade over 10 years ago

I am running version 9.102-8.
It is a clean install of 9.1 and all entries were created from scratch.

Interestingly, some dynamic DHCP clients show a hostname in the hostname field of the astaro DHCP IPv4 lease list. So this really seems to be related to DHCP reservations only.

Bjoern
Cancel
Vote Up 0 Vote Down

Cancel
0 Crisman over 10 years ago

Hi,

I had the same problem and installed 9.102-8 from the scratch too.

see attached image:
- dhcp.png
- View
- Hide
Cancel
Vote Up 0 Vote Down

Cancel
0 Crisman over 10 years ago

Has anyone else has this issue on the IPv4 Lease Table?

Probably should be reported has a bug!!!
Cancel
Vote Up 0 Vote Down

Cancel
0 most_ahdy over 10 years ago in reply to Crisman

Yes , I have this issue too.
I have UTM 9.1 version 9.106-17.
Cancel
Vote Up 0 Vote Down

Cancel
0 shadow1107 over 10 years ago

I have same issue on UTM 9.1 version 9.107-33[:(]
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 10 years ago

Hi, what OS are the hosts running?

On my 9.106, Apple iOS devices show as 'unknown', but Windows & Androids & BSD machines are showing their correct hostnames.

FYI, you can look up MACs at http://www.coffer.com/mac_find/

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 xianx over 8 years ago

I still have the same prob.. how to fix this
Cancel
Vote Up 0 Vote Down

Cancel