This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SMTP Proxy setup: Newbie needs help

Hi folks.

I'm trying to setup SMTP proxy and I'm not sure I have the right idea, i.e. brain possibly in dense mode.

I'm tesing with domain byted.com and have it's MX record pointing to the ASL outside IP.

In ASL:
Accepting incoming domains: byted.com
Mail relay for: LAN (defined as the /24 of the local network)
SMTP routes: byted.com --> 192.168.2.155 (the IP on private LAN that hosts the RH 7.2 mail server (CommuniGatePro))

Do I have to do anything in the Packet Filter section?

Do I have the right idea and the problem is .155?

Thanks in advance for any insight you may be able to provide.

Heinz

This thread was automatically locked due to age.

0 grimphyre over 22 years ago

I can't imagine why it shouldn't work. I have quite similar configuration.
Cancel
Vote Up 0 Vote Down

Cancel
0 Heinz Wittenbecher over 22 years ago in reply to grimphyre

Thanks very much.

At least that confirms I have the ASL part right and I will look downstream. My major concern was that I didn't grasp the concept correctly as it's my first try at proxy stuff.

Thanks again

Heinz
Cancel
Vote Up 0 Vote Down

Cancel
0 Marius over 22 years ago in reply to Heinz Wittenbecher

Try to let the field "Accepted incoming domains:" be empty. What happends then?
Cancel
Vote Up 0 Vote Down

Cancel