Sophos Update Failed with Checkpoint Endpoint VPN Client (since v86.40)

Hi jean-philippe CLERC,

Thank you for reaching out to the Sophos Community! Please allow us to check this further. In the meantime, please share the logs that show the Checkpoint VPN blocking the Sophos update, this will help us further analyze the issue. If you have opened a support case related to this, kindly share the case number as well.

Have you also reached out to the vendor (Checkpoint VPN) to check if this is a known conflict with their software?

I look forward to your reply. Thank you.

Hi Gladys thanks for this answer

i found this information in log file (

[ 1300: 27] [v2.4.230.0] ERROR Execute ClientUpdate failed. Check if Sophos Update Service is running.
EXCEPTION: System.Runtime.InteropServices.COMException (0x8000FFFF): Défaillance irrémédiable (Exception de HRESULT : 0x8000FFFF (E_UNEXPECTED))
à ActiveLinkClient.IClientUpdate.UpdateNow(Boolean MayShowGUI, InstallMode InstallMode)
à Sophos.NetUI.Endpoint.Sau.<>c__DisplayClass12_0.<UpdateNow>b__0()

"C:\ProgramData\Sophos\Sophos UI\logs\SophosUI.Net.log"

case opened: 05548403 

we are contacting the vendor too

thanks and best regards

Jean-Philippe

Hi Gladys thanks for this answer

i found this information in log file (

[ 1300: 27] [v2.4.230.0] ERROR Execute ClientUpdate failed. Check if Sophos Update Service is running.
EXCEPTION: System.Runtime.InteropServices.COMException (0x8000FFFF): Défaillance irrémédiable (Exception de HRESULT : 0x8000FFFF (E_UNEXPECTED))
à ActiveLinkClient.IClientUpdate.UpdateNow(Boolean MayShowGUI, InstallMode InstallMode)
à Sophos.NetUI.Endpoint.Sau.<>c__DisplayClass12_0.<UpdateNow>b__0()

"C:\ProgramData\Sophos\Sophos UI\logs\SophosUI.Net.log"

case opened: 05548403 

we are contacting the vendor too

thanks and best regards

Jean-Philippe

Do you know if disabling any combination of Sophos' scanning features from the local tamper-override allows SophosUpdate to start normally? The following article outlines how to test this. This may help you establish a temporary work-around.
- Sophos Central Endpoint: Basic troubleshooting

Hi Qoosh

i tried to disable protection for sliding on/off components (i used in before in other case) BUT when in admin mode with password ok, i can't tick the case for replacing policies, tick is not operate...so i can not test some work-around... button is not functionnal, like the manuel button for updating sophos.... all of this problem are here when checkpoint client is installed...

When testing an installation of CheckPointVPN, I found that during the installation process, the default option is "Checkpoint Endpoint Security VPN". 

After the installation completes and a restart is performed, you can see an additional Filesystem filter driver loaded into the OS by running the command "fltmc" in an administrative command prompt. 

If you are unable to interact with Sophos' scanning features from the local tamper override, you can also try stopping the services normally from the Services menu. 

If this also does not work, you may want to try isolating "vsdatant.sys" first. From the information present in the UI for the VPN software and what is shown on the following page from CheckPoint's website, it does sound like there are some overlapping features in both Sophos and CheckPoint which are conflicting. 
- www.checkpoint.com/.../

very interesting Qoosh i test this today many thanks

Yes, this is very interesting Qoosh i test this today many thanks

for information ALi sheikh & Qoosh

Qoosh said:

you can also try stopping the services normally from the Services menu. 

i stopped and also disabled the start of service (because it's restarting automatically at each shutdown) but driver filter loaded even after reboot

i tried too to unload vsdatant with "fltmc unload vsdatant" but i get error 0x801f0010

You can find the file "vsdatant.sys" in the following directory. One option would be to rename this file so that it can't be loaded upon startup. 
- C:\Windows\System32\drivers\

To find a more permanent solution, I suggest inquiring with the Checkpoint team to see how protection features can be disabled in their agent. This way Sophos can take over protecting the device, and the VPN can still be used. 

hi Qoosh 

i worked on it, when safe mode i can disable driver "vsdatant.sys" with autorun tool from sysinternal BUT VPN service is not available in normal mode, so Checkpoint not functionnal...