Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 7 replies
  • Subscribers 8 subscribers
  • Views 8714 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems with Sophos UTM firewall home.

Emanuel Borda
Hello, I installed on a machine this firewall but I have no access to the Internet or the Web admin. My path to access the firewall is https://192.168.0.1:4444/. But it never opens because I don't have the Internet. I tried the Windows troubleshooter but it tells me that I do not have a valid IP. The computer is connected as well: from the router to the firewall and from the firewall to my computer. If anyone can help me very grateful in advance. Best regards.
 


This thread was automatically locked due to age.
Parents
  • +1

    I suppose the you can solve the IP address problem by assigning your machine a static IP in the same subnet as the firewall's LAN. I have an XG at home so I dont remember the exact installation steps - but I suppose  you have to manually select the LAN IP on which the firewall will be  reached when you install it. You can validate the IP on which the firewall is listening on the firewall boot screen. Assuming that IP is 192.168.0.1:4444 ; assign your machine  192.168.0.2 with a 255.255.255.0 subnet mask and gateway as 192.168.0.1. Validate cable connectivity and you should have access to the firewall then. 

    To enable access to the internet for the LAN devices look at this video - https://www.youtube.com/watch?v=m7A-fKEQJys

    P.S - If you don't really have a strong need to use the UTM product , try the XG.It has most of the features in the UTM product that you may want for home use. I found it friendlier to configure and easy.

Reply
  • +1

    I suppose the you can solve the IP address problem by assigning your machine a static IP in the same subnet as the firewall's LAN. I have an XG at home so I dont remember the exact installation steps - but I suppose  you have to manually select the LAN IP on which the firewall will be  reached when you install it. You can validate the IP on which the firewall is listening on the firewall boot screen. Assuming that IP is 192.168.0.1:4444 ; assign your machine  192.168.0.2 with a 255.255.255.0 subnet mask and gateway as 192.168.0.1. Validate cable connectivity and you should have access to the firewall then. 

    To enable access to the internet for the LAN devices look at this video - https://www.youtube.com/watch?v=m7A-fKEQJys

    P.S - If you don't really have a strong need to use the UTM product , try the XG.It has most of the features in the UTM product that you may want for home use. I found it friendlier to configure and easy.

Children
Unfiltered HTML