Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 6 subscribers
  • Views 4285 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

safeguard 7 bitlocker how do i enable encryption on non bootable device

WolfgangFischer

Hello everybody,

i have a problem with the Bitlocker encryption for non bootable Device. I have one policie for the Boot volume that works fine and now i want to encrypt the D Partion and E Volume on the same System but Safeguard do not start the encryption on that volumes. I had created a policie for internal Memory and for internal Memory\other... but nothing work.

I had no AD GPO´s configured.

Has someone an idea.

with best Reagards Wolfgang



This thread was automatically locked due to age.
  • FormerMember
    0 FormerMember

    Hello Wolfgang,

    Do an RSOP for the user on the machine and make sure the D:\ and E:\ partitions are receiving the encryption policy.
    It's worth noting the additional volumes can only be encrypted with BitLocker after the C:\ drive has been encrypted, as the key is stored on that volume, not off the machine like when the the C:\ drive is encrypted.
    Lastly you'll need to make sure they're ready to be encrypted and meet all the criteria. Can you manually enable BitLocker, do they encrypt then?

  • 0 in reply to FormerMember

    Hi Toby and thanks for the Reply.

    In RSOP the policies are fine for the drive and say that the drive should be encrypted. If i activate manually Bitlocker for the drive it works and the windows screen Comes up where i can set the Password, the path for the key... 

    my policie and the RSOP looks like this:

    The Screens come from an lab where the drive is F:

    with best regards

    Wolfgang   

Unfiltered HTML