Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 5563 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Safeguard Encryption on a Dell Precision 7510

RashadHussain

Once installed it gets stuck on a white screen after the agent has loaded.

I have tried holding the Left Shift key but that doesn't do anything.

Please help.



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi Rashad,

    Is it just occurring during a cold boot? if so then a SHIFT-F9 will resolve the issue. As soon as the machine boots up you'll need to keep pressing the Shift key, you'll then a getting a message saying the shift key has been pressed and "awaiting hotkey". Press F9 then.

    If that doesn't work please take a look at KB 111919 which has further troubleshooting steps.

Reply
  • FormerMember
    0 FormerMember

    Hi Rashad,

    Is it just occurring during a cold boot? if so then a SHIFT-F9 will resolve the issue. As soon as the machine boots up you'll need to keep pressing the Shift key, you'll then a getting a message saying the shift key has been pressed and "awaiting hotkey". Press F9 then.

    If that doesn't work please take a look at KB 111919 which has further troubleshooting steps.

Children
  • 0 in reply to FormerMember

    Hi Toby,

    Thanks for your advice. I have tried this but had no luck I'm afraid.


    The Laptop has been sent to Sophos to investigate. We think it may be because the hard drive isn't a regular SATA one. It is soldered onto the motherboard.


    Will keep this thread updated with what they find.


    Thanks

Unfiltered HTML