Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 3 subscribers
  • Views 13934 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SPX Encryption on Internal Users

Malantod

Hi!

I've been testing SPX encryption and would like to confirm if its a normal process of SEA SPX.. 

Test1: send encrypted mail to Gmail -> set password -> view email -> pdf attach -> view pdf  = (successful)

Test2: send encypted mail from abc.com to abc.com (internal mail)  = NO Encyption happened

 

Please advise..

 

Thanks!

 



This thread was automatically locked due to age.
Parents
  • 0

    Does your internal email pass through the email appliance?

    If not (I would expect it not to) then no encryption will be applied.

  • 0 in reply to Papadug

    Hi Martin,

    That's my goal actually, make the internal users pass through SEA.  Can you suggest anything, how am i going to configure this on exchange 2010?

     

    Thanks!

  • 0 in reply to Malantod

    As far as I'm aware it won't be possible as the SEA is a gateway device.

    For internal email we use PureMessage 

  • 0 in reply to Papadug

    "As far as I'm aware it won't be possible as the SEA is a gateway device."

    That is correct it is not possible to encrypt internal > internal mail, internally as far as I am aware puremssage does not support SPX. 

    Normally exchange would identify the message as internal and simply drop it in the recipients box.

     

    The exception would be if you are using a cloud provider and internal mail is been routed out to the cloud and then back.    In that case the appliance as the gateway device would work..

    But..  I would not recommend routing internal mail to the cloud / internet and back in under any circumstance. 

Reply
  • 0 in reply to Papadug

    "As far as I'm aware it won't be possible as the SEA is a gateway device."

    That is correct it is not possible to encrypt internal > internal mail, internally as far as I am aware puremssage does not support SPX. 

    Normally exchange would identify the message as internal and simply drop it in the recipients box.

     

    The exception would be if you are using a cloud provider and internal mail is been routed out to the cloud and then back.    In that case the appliance as the gateway device would work..

    But..  I would not recommend routing internal mail to the cloud / internet and back in under any circumstance. 

Children
No Data
Unfiltered HTML