Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 22 subscribers
  • Views 5180 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Safeguard with Bitlocker

Marco Curtolo

Dear all,

i have some notebook with Windows 10 pro where i receive some errors about TPM when i try to enable Bitlocker using the classical Windows procedure.

My question is: may Safeguard bypass this problem and enable full disk encryption on these machines, give to me also the possibility of a pre-boot authentication with a pin ?

thank you.



This thread was automatically locked due to age.
Parents
  • +1

    Hello Marco 

    Safeguard Enterprise Native Device Encryption simply managed Bitlocker on the device.  If the TPM is disabled or not used, Safeguard can use a fall back protector "Passphrase".  By default the Authentication policy "Fallback Logon mode for boot Volumes" is set to "Password or startup key".

    This fallback option would give you pre-boot authentication with a password (with out using the TPM).  The complexity you can define and there is nothing to stop you using just numbers.

    I hope this helps.

    Bill.

Reply
  • +1

    Hello Marco 

    Safeguard Enterprise Native Device Encryption simply managed Bitlocker on the device.  If the TPM is disabled or not used, Safeguard can use a fall back protector "Passphrase".  By default the Authentication policy "Fallback Logon mode for boot Volumes" is set to "Password or startup key".

    This fallback option would give you pre-boot authentication with a password (with out using the TPM).  The complexity you can define and there is nothing to stop you using just numbers.

    I hope this helps.

    Bill.

Children
No Data
Unfiltered HTML