Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 0 subscribers
  • Views 4509 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Failed to read configuration

ryannj82

Hi guys

Hope you can help me I see the following being logged in the event logs from time to time

This is logged on my pure message server as per event

Im running version 3.1.0.0

Device: Server
| Event Log: Application, Error
| Source: PureMessage
| Event ID: 62
| User: SYSTEM
| Event Time: |
| Failed to read configuration while processing message '<email address >' (error: '0x8000FFFF')

:18451


This thread was automatically locked due to age.
  • 0

    Hello.

    We've seen that error appear when older versions of the Sophos Endpoint client are used in conjunction with Puremessage to scan messages that include a complex PDF that contains a large number of HTML links. You can read a bit about the problem on this knowledgebase article: http://www.sophos.com/support/knowledgebase/article/110315.html

    Normally, restarting the SAV service clears this, but there have been some updates if you're running an older SAV version. However, we have also seen issues with synchronization to mobile devices tied to this error, so if you haven't already, please contact our support staff if these errors persist so we can investigate deeper into your environment.

    Kind regards...

    :19135
Unfiltered HTML