Thread Info
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 4931 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Transparent Proxy Help >

ChrisRoss

I looking to setup a new transparent proxy at work for public internet and cannot seem to get transparent mode to work. I have deployed the Sophos Web Appliance VM. Can you added another NIC to the VA ?

The public internet is presented via an HA Pair of SonicWALL NSA 3500 and the VA is sitting on the dedicated ESXI 5.5 host.



This thread was automatically locked due to age.

  • To setup Transparent proxying you need to use policy routes in your firewall/gateway router

    A policy route routes traffic to any internet bound destination for specific ports (80 443 and any other non-standards (although need to support this in SWA)) to the SWA. To be clear, this is not a NAT rule but a policy route, source and destination are not modified.

    The policy route should obviously exempt the SWA itself.

    Now if the SWA is set in transparent mode it will filter anything that it receives on those ports. 

Unfiltered HTML