Certificate error when uploading to Sophos Email Appliance

FIXED

If you have a UC Certificate (Unified Communications) for Exchange 2010 and wish to use this in your Sophos Email Appliance then here's what you need to do:

**Sophos don't support UC Certificates at time of writing, so any issues and you're on your own and I take no liability/warranty on this.**

1) Goto your Exchange server where you created the CSR and installed the certificate - usually this is your first CAS server

2) Goto "MMC", add the snap-in of "Certificates (Local computer)"

3) Within that, goto Personal Store and you should see your UC Certificate (make sure it has a little key in the icon)

4) Right click, "All Tasks", "Export".

5) Export the Certificate
6) Click next to the start of the wizard

7) Click "Yes, export the private key"

8) Leave it as "Personal Information Exchange - PKCS #12 (.pfx) and do not tick any of the sub items else this causes Sophos box to error.

9) Give it a password

10) Give it a file name

11) Click "Finish"

Now on your computer on the same network

12) Install OpenSSL Light by Shining Productions - you may need to follow their guide on installing that.

13) Fire up CMD in elevated mode - dont have too but for the sake of ruling out issues.

14) Load OpenSSL by going to the directory and type "OpenSSL"

15) Copy to your local machine the exported certificate and key that you've just done

15) Enter the following command

pkcs12 -in [PATH of Exported certifcate] -out [Path of destination of new certificate] -nodes

E.g. pkcs12 - in c:\exported.pfx -out c:\converted.pem -nodes

16) It'll ask for the password when you exported it

17) It'll report "MAC verified OK"

18) Goto your Sophos Appliance portal and upload the certiticate in System -> Certificates.

19) That's it!

Note on SPX Encryption Portal

To get the UC Certificate working you need too

1) Now goto Policy -> Encryption -> Portal (Configure).

2) Because its a UC Certificate then it is likely Sophos box will choose the first entry in the certificate which might not be the one you want. Simply click "Specify a custom hostname:" and type in the desired address/entry in your certificate to use for the SPX Portal.

That should now use the correct entry when visitors come to your portal.

FIXED

If you have a UC Certificate (Unified Communications) for Exchange 2010 and wish to use this in your Sophos Email Appliance then here's what you need to do:

**Sophos don't support UC Certificates at time of writing, so any issues and you're on your own and I take no liability/warranty on this.**

1) Goto your Exchange server where you created the CSR and installed the certificate - usually this is your first CAS server

2) Goto "MMC", add the snap-in of "Certificates (Local computer)"

3) Within that, goto Personal Store and you should see your UC Certificate (make sure it has a little key in the icon)

4) Right click, "All Tasks", "Export".

5) Export the Certificate
6) Click next to the start of the wizard

7) Click "Yes, export the private key"

8) Leave it as "Personal Information Exchange - PKCS #12 (.pfx) and do not tick any of the sub items else this causes Sophos box to error.

9) Give it a password

10) Give it a file name

11) Click "Finish"

Now on your computer on the same network

12) Install OpenSSL Light by Shining Productions - you may need to follow their guide on installing that.

13) Fire up CMD in elevated mode - dont have too but for the sake of ruling out issues.

14) Load OpenSSL by going to the directory and type "OpenSSL"

15) Copy to your local machine the exported certificate and key that you've just done

15) Enter the following command

pkcs12 -in [PATH of Exported certifcate] -out [Path of destination of new certificate] -nodes

E.g. pkcs12 - in c:\exported.pfx -out c:\converted.pem -nodes

16) It'll ask for the password when you exported it

17) It'll report "MAC verified OK"

18) Goto your Sophos Appliance portal and upload the certiticate in System -> Certificates.

19) That's it!

Note on SPX Encryption Portal

To get the UC Certificate working you need too

1) Now goto Policy -> Encryption -> Portal (Configure).

2) Because its a UC Certificate then it is likely Sophos box will choose the first entry in the certificate which might not be the one you want. Simply click "Specify a custom hostname:" and type in the desired address/entry in your certificate to use for the SPX Portal.

That should now use the correct entry when visitors come to your portal.