Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 1 subscriber
  • Views 3172 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Info about AP10 - continuity of signal

eclipse79oldacct
Hello, 
currently we have some access points, some of them are set as "repeater" and we have continuity of signal among our office. I plan to move to Astaro AP, I have read some docs about AP10/30 but I have seen no references about repeater mode. What about continuity of signal? If I walk through my office (and I install the correct number of APs,) do you think that the Wi-Fi cards of laptops will correctly move from AP to AP?

Thank you
eclipse79


This thread was automatically locked due to age.
  • 0 in reply to hschaa
    We intended to add 802.11r support in 8.200 (which is a relatively new standard to support even faster handovers, especially useful for voip traffic). However, since there are almost no clients supporting it we dropped 802.11r for now. So, the roaming behavior shouldn't change between 8.100 and 8.200.

    Helmut


    Understood, I'll have to research what 802.11r entails.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Unfiltered HTML