Hello everybody, we have the following scenario:
Our Sophos SG 230 has last firmware.
We have added Sophos RED Interface to Wireless Protection> Global Settings> access control
Sophos RED is added as an access point in SG 230 (is active) and this access point is assigned the wifi network "Office2-Wifi".
In the firewall we have created an Allow rule: RED networks> any> any
Under "Interfaces" we did not create a wifi-interface for Wifi network because no wireless NIC is displayed under available NICs. Now eth0, eth1, etc. are displayed. But this step is not necessary with "Bridget to LAN AP" Wifi?
It works:
If a laptop is connected to Sophos RED LAN port, then the laptop can access internet and split networks (behind SG 230) - Everything is OK.
That does not work:
If the laptop is connected via Wifi, then the laptop has access to internet but not to split networks (behind SG 230). I can not reach split networks (timeout by ping to server ip adresses behind SG 210)
Please help, what did I set up wrong?
This thread was automatically locked due to age.