This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless AP on VLAN, DHCP not working

Hello,

 

I am on an UTM 9 and I am trying to setup our wireless network on a separate VLAN, I followed a Sophos guide but the client can't get any IP adress.

 

Here are the step I have took to set it up :

 

- Connect my 3 AP10 and the eth2 port of the Sophos via my Cisco SG500.

- Set those 3 ports on the Cisco as VLAN 40 tagging.

- Add an interface of type Ethernet on eth2 in the UTM. (192.50.50.1 /24)

- Creat a DHCP for this interface.

- All three AP have got a IP from that DHCP.

- Set all three AP on VLAN 40 tagging.

 

- Add an interface of type Ethernet VLAN on eth2 tagged on VLAN 50. (192.60.60.1 /24)

- Create a DHCP for this interface. 

- Create a wireless network as Bridged to VLAN 50.

 

I see the network but I can't get a IP from it.

Am I missing something ?

 

Thank for help.



This thread was automatically locked due to age.