This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco vpn client - Remote access connection to UTM v9.411-3

Hi all

I 've

On my laptop I have Cisco VPN client v5.0.0.7.0440 installed.

I configured the UTM for the Cisco VPN client.

When I try to connect to the UTM the live log says the following:

2017:04:19-12:40:00 sophosutm pluto[21934]: packet from x.x.x.x:4404: size (865) differs from size specified in ISAKMP HDR (849)
2017:04:19-12:40:00 sophosutm pluto[21934]: packet from x.x.x.x:4404: Cisco VPN client appends 16 surplus NULL bytes
2017:04:19-12:40:00 sophosutm pluto[21934]: packet from x.x.x.x:4404: unsupported exchange type ISAKMP_XCHG_AGGR in message
2017:04:19-12:40:00 sophosutm pluto[21934]: packet from x.x.x.x:4404: sending notification UNSUPPORTED_EXCHANGE_TYPE to x.x.x.x:4404

Is this Cisco VPN client no longer supported or is something else not properly configured?

Link to BAlfson: Connecting to Astaro using the Cisco VPN Client doesn't seem to work anymore

Cisco client Anyconnect? From/to which version. Or if I read correctly works only with Cisco ASA?

Free and safe alternitives?

Thanx Jaap



This thread was automatically locked due to age.