This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site to Site VPN - local/Remote Subnet Configuration conflict

Need to create 20 site to site IPsec Tunnels, all remote sites are cradlepoints with 192.168.20.0 through 192.168.40.0, each site is obviously different subnets.  They all communicate with a single server at the office.  so the local subnet is always the same IP Host.  I'm getting this with all my VPNs eventhought they are all on different subnets. 



This thread was automatically locked due to age.