Hi following setup, simplified to explain
an UTM on an sg320 with a red sd-20
managed switch with vlans on main side
managed switch behind red with vlans
red is setup in split mode
Main office 10.0.0.0/16 ( vlan 1 )
remote side behind red 172.17.19.0/24 ( vlan 1) managed by UTM
remote side second vlan 10.106.1.0/24 ( vlan 1001)
created a red vlan device with vlan 1001 with IP Address 10.106.1.1
have a device in this vlan (10.106.1.11)
from the utm I can access the 10.106.1.11 but I cannot access 10.106.1.11 from Main office
i have created static routes entry in UTM but it does not work