Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 4 subscribers
  • Views 23816 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAN Interface flapping

ChrisBKA

Hi,

 

i discovered that one of my WAN Interfaces keeps flapping.

 

I set it to static 1000MBits FULL to avoid negotiation errors. but this doesn't help out either. 

 

The Question is:

 

In which log can i see why the Interface is in error state and why it is marked as disabled ?

 

Thanks in Advance,

 

Chris



This thread was automatically locked due to age.
  • 0 in reply to ChrisBKA

    You got the right solution, Chris - I could be wrong, but I think the MTU issue is a symptom, not a problem/solution.  The free fix in #7.7 didn't work because of the limitations of the FritzBox.  Sachin's solution is quick and easy if you have a small, spare switch around, or a managed switch that can accomplish the same thing.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML