Trying to get a new AP installed after the last one blew up...
Using UTM 9 (just upgraded to the latest available (9.605-1))
Using a Zyxel VLAN capable access point - configured with three SSIDs, all on tagged VLANs (Internal, Guest, IoT)
At home I have the Same AP, and the same Sophos hardware, but I have a VLAN capable switch - so the UTM hardware isn't doing any of the smarts.
Here I need to use the UTM to connect the wired and wireless portions of two of the networks (the Guest network has no wired element).
I can't actually see a sane way to do this at all, and it really doesn't seem like it ought to be difficult.
Eth0 - Internet connection
Eth1 - Wired "Internal" Connection
Eth2 - Direct to AP, with tagged Internal/Guest/IoT connections
Eth3 - Wired "IoT" Connection
It is starting to look as though I need to add a Wired Internal, and a Wireless Internal, network, and give them independent router IP addresses, and DNS/DHCP servers and goodness knows what else - All I want to do is add the tagged VLAN into the existing "interface".
This thread was automatically locked due to age.