Configure public Routed subnet with PPPOE on Sophos UTM SG

Question

Hello Guy&rsquo;s, 
 I need to setup a UTM SG 135 with Public ip address with a routed subnet. My wan interface needs PPPOE. Is there an Article, video tutorial to achieve this? 
 Network configuration is. 
 
 Eth0: WAN With pppoe and public ip 82.z.y.130 
 Eth1: LAN with several internal VLANs 
 Eth2: Uplink to customer B router (ip from routed subnet. 82.z.y.161/29) Need to route through WAN 
 Eth3: Uplink to customer A router(ip from routed subnet. 82.z.y.162/29) Need to route through WAN 
 Love to hear from you

BAlfson · Answer

Hoi Stephan, 
 This should be straightforward as long as your ISP routes the other IPs to 82.z.y.130. 
 You might want to edit your post above because 82.z.y.161/29 overlaps with 82.z.y.162/29 and would create routing problems. I suspect you will want something like 82.x.y.161/30 and 82.x.y.165/30 where B has .161 and A has .166. 
 Cheers - Bob