Hello
I have an SG210 REV3 running UTM 9.700-5. I have purchased a second SG210 REV3 that we would like to use as a slave in Hot Standby mode.
The second UTM is running 9.509. My understanding is that the slave will need to be upgraded to the same FW as the master.
The second UTM has only the "base" license which means I can't use automatic Up2Date to install the latest firmware.
I have attempted to update the UTM manually, which I understand must be done one FW update at a time and sequentially. In my case this means updating to 9.51 (this is the next FW on the FTP site).
I have uploaded the FW to the UTM which then recognises there is an update to install, and I then start the installation process. The UTM restarts, but when I log in it is still 9.509. In the Up2Date Log are the following messages:
auisys[7895]: You are currently running Version 9.509003, but Version 9.510004 is required for this up2date package
auisys[7895]: id="371J" severity="error" sys="system" sub="up2date" name="Fatal: Version conflict: required version: 9.510004 <=> current version: 9.509003" status="failed" action="install" package="sys"
The log for the whole update is attached to this post. It does mention it is loading other Up2Date packages, but I haven't uploaded them.
Where am I going wrong?
Many thanks
This thread was automatically locked due to age.