This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

High httpproxy memory usage with 9.713 and 9.714

Hello,

I have a pair of virtual UTMs which have run for years with about 4G of RAM allocated to them. After the upgrade from 9.712 to 9.713 in Nov I noticed my swap usage climbing beyond its normal 10-15% level. The culprit was the httpproxy proces so I added about 1/2G to the VMs which returned the swap usage to about 15%. This past week I updated to 9.714 and observed the httpproxy process growing much larger driving swap usage into the 60% range.

The two systems run with almost identical configurations which change very little over time. Our usage patterns have not changed much either. I have not noticed anything in the release notes suggesting a significant change that should require more memory, so my suspicion at this point is that the httpproxy process has a memory leak.

The graph below shows 9.714 after a restart last week. Here is the current httpproxy memory/swap usage:

  PID USER      PR  NI  VIRT  RES  SHR S   %CPU %MEM    TIME+  SWAP COMMAND                                                                                                      
 4776 httpprox  20   0 6202m 1.6g 3996 S      1 38.4  46:09.01 4.4g httpproxy
                                                                                                     

--Larry



This thread was automatically locked due to age.