We tried reflashing of an XGS116 by bootable USB stick (we tried also another USB Device and also front+back panel USB port of appliance) and Installer HW-19.0.1_MR-1-365.iso - Did NOT work as described! Device seems not to boot from USB-Stick. You see Status blinking for about 3 Minutes and than status stays green and you see normal HDD activity (blinking blue LED) while booting...
We also tried to push Enter while booting but did not change anything...
Reflashing seems not so be possible without graphic output or any change of boot order or something like that...
We also tried an iodd bootable usb device (same we use for flashing UTMs) and we mount the the installer ISO with thad device (HW-19.0.1_MR-1-365.iso).
The Status LED just blinks for 2-3 Minutes and you see the blue HDD LED also blinking some times but than the status led stays green after 2-3 minutes - I think reflash should take more than 2-3 minutes...
OMG the reason was an old XG Appliance AC-Adapter that we used in our workshop - Seems the USB ports of the appliance didn´t work correctly with that power adapter - appliance in all worked normal! With original power adapter everything worked as expected with(re) flashing devices with USB...Just the XGS 116 console output didn`t work correctly - XGS126 console output works as expected...
You should compare the Watt coverage of both appliances. XGS has a higher power consumption compared to the XG/SG Hardware due the fact, there are two Chips running.
