Below is my network topology, with an example device in network A:
I configured a static route on Network A as follows:
10.1.2.0/24, next hop, 192.168.1.251
I want to do the same in reverse from the UTM (10.1.1.0/24, next hop, 192.168.1.10). How do I add this static route?
Also, is there anything else that I need to add to make sure I can see devices on Network A from Network B?
just create a gateway route at iterface&routing / static routing
Explain it to me like I'm 5. I understood the Unifi interface, but I don't understand the Sophos interface for adding a static route. It's not the standard 0.0.0.0 -> 18.104.22.168 format.
You have to define which networks you will route and which gateway you will use. The gateway is the next hop. That's all.
In UTM create host (192.168.1.10) and use it as Gateway when you create Static RouteThe Network 10.1.1.0/24 must be created in UTM asloAd the rules in Firewall to allow such traffic Internal > any > lan10 (10.1.1.0/24 > AllowThe problem must be the configuration of the UBNT. It has to allow these traffic too.
This is unrelated to your question, Brendan... You might want to put the FiOS into bridge mode so that the UTM can get a public IP and move the other 10. subnet to an interface on the UTM, thus getting rid of the need for the Ubuntu-based router. That also means you'd no longer be doing double-NAT.
Cheers - Bob