I have a AP50 with a normal WPA2-PSK running with bridge to lan, all ok.
Now for test, I add a WPA2-Enterprise SSID to the existing accesspoint, but I have not setup RADIUS yet, I know this has to be done, but I started this way, and wanted to configure radius afterwards.
Now the existing SSID with PSK get's offline, and the AP50 stops broadcasting anything, all the WIFI logs shows this, when I add the Enterprise network:
2014:11:25-09:05:20 192.168.110.73 aweclient[728]: aweclient.c (1745) A signal received during select.
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): Configuration file: /var/run/hostapd-phy1.conf
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): Line 42: empty shared secret is not allowed
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): 1 errors found in configuration file '/var/run/hostapd-phy1.conf'
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): Failed to set up interface with /var/run/hostapd-phy1.conf
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): hostapd_init: free iface 0x5540d8
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): Failed to initialize interface
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): cat: can't open '/var/run/wifi-phy1.pid': No such file or directory
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): Configuration file: /var/run/hostapd-phy0.conf
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): Line 42: empty shared secret is not allowed
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): 1 errors found in configuration file '/var/run/hostapd-phy0.conf'
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): Failed to set up interface with /var/run/hostapd-phy0.conf
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): hostapd_init: free iface 0xb540d8
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): Failed to initialize interface
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): Command failed: Invalid argument
2014:11:25-09:05:21 192.168.110.73 netifd: radio1 (3539): Device setup failed: HOSTAPD_START_FAILED
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): Command failed: Invalid argument
2014:11:25-09:05:21 192.168.110.73 netifd: radio0 (3538): Device setup failed: HOSTAPD_START_FAILED
When I remove the WPA-Enterprise network, the normal WIFI startes working again.
is this how it's supposed to work, when radius is not setup?
