Multipath working pretty well... we are using it live on our network. Had a few connection losses yesterday, but not convinced that wasn't our provider (however a restart resolved it). Anyway, that's beside the point.
Here's something I found with the WebAdmin when using multipath. To reproduce:
[LIST=1]
- Add an interface to Uplinks. (I added our LAN interface when the ASG was still downstream of our live router, so the ASG could get updates).
- Remove said interface from uplinks list.
- Go to edit the interface in Networks. Note that it still has a gateway ticked and gateway IP set (this should be deleted or disabled when you take the connection out of uplinks).
- Try to add or remove an Additional Address. You will get an error that you can't have more than one gateway (excluding uplink interfaces). This is related to the point above - when the gateway is still ticked on a non-uplink interface, it cause this issue).
I haven't got the Webadmin in front of me, but going from memory. Should be fairly easy to reproduce though.
Thanks
