I am using my home licence on 993.
The problem is that the counting process counts every IP address that appears on the network whether it goes through the firewall or not.
The list below are the devices involved
1/. ASG internal interface
2/. WAP - ntp (ASG time server) only blocked for everything
3/. 2 print servers - specifically blocked for everything to reduce noise in filter (only one appears in the address allocation table)
4/. a test box - blocked by default
5/. an address that has been allocated to a device in networks but not used yet
Some of these, if not all should be in the "out of scope" column.
Later today I will start working through the 908 fault list adding comments on whether 993 fixes things or not.
Ian M[:$][:S][:)]