This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to register APX120 in CM

Hi folks,

I am having performance issues with my APX120s and a suggestion has been made to register them with CM to see if there is a newer version of firmware.

What trick do I need to use to register the APX with CM?

I have tried restarting the APX, give it its own unlimited access to the internet, but still no joy.

Ian

This thread was automatically locked due to age.

Top Replies

LuCar Toni over 3 years ago in reply to rfcat_vk +1

Yes - Deletion a AP in XG will automatically deregister the APX:

0 rfcat_vk over 3 years ago in reply to rfcat_vk

Hi,

there appears to be a bug in the APX wifi firmware in that you cannot select the 80mhz channels even though the 80mhz is ticked.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 LuCar Toni over 3 years ago in reply to rfcat_vk

That is not a bug, instead a feature works as desgined in OpenWRT.

See: https://community.sophos.com/utm-firewall/f/german-forum/123315/20mhz-und-oder-80mhz-band-in-wireless-protection-auf-ap100c-aktivieren/451480#451480

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 3 years ago in reply to LuCar Toni

Thank you, I read all that thread with interest and it really does point out that the APX firmware has a bug, It is a bug if the APX do not utilise the 80mhz where as the AP55s and the Ubiquiti AP do quite happily.

Also something happened to the 2.4ghz because the APX and now the AP55s only connect at the 20mhz channel maximum speed, not the 40mhz maximum speed.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel