Getting the Guest Hotspot To Work Correctly

Question

I currently have a Sophos UTM220 and an AP30, i'm trying to get the AP30 to broadcast two separate SSID's one for a password protected network and one for the guest network which will be open. My Sophos UTM220 is running in bridged mode with web filtering set to full transparent mode. So this is what i've tried so far to do to get this to work: 
 
 Setup both the password protected and open (guest network) on VLANS which didn't work 
 Plug a separate ethernet connection from the router into the firewall and setup another interface which also didn't work 
 
 Any help to solve this would be much appreciated. 
 Thank you, 
 Patrick.

sachingurung · Answer

Hi Patrick, 
 I am sure you have configured most of the parts for this setup and I think you are stuck at the point when the Users are not able to get the IP address from the AP. 
 Make sure you have the DHCP server setup for the Wireless Interfaces, if Guest Network is defined to work on a Separate Zone then add the Virtual Interface in Interfaces section and define a DHCP server for the interface. Finally, 3 things to check, 
 
 Add Wireless network to DNS allowed network list. 
 Add a Masquerade rule to MASQ wireless network traffic. 
 Firewall Rule, Wireless Networks to WAN. 
 
 If that is not the scenario, please describe the issue. 
 Thanks.