Thread Info
  • State Verified Answer
  • Replies 10 replies
  • Subscribers 8 subscribers
  • Views 9213 views
  • Users 0 members are here
Options
Suggested

Questions about the FastPath Feature

Dom Nik

Hi Sophos-Team,

I searched for the topic, but I haven't found a thread for it. Therefore I'd like to start a discussion/knowledge collection about the new fastpath feature.

My XG shows the following console output:

console> system firewall-acceleration show 

Firewall Acceleration is Enabled. Fastpath Load Failed.

Is this related to the new fast path feature?

What could be the reason for the failure?

Is the fast path feature available to SW appliances / virtual machines / home users etc.?

Thanks and Best Regards

Dom

Parents
  • +1

    Hi Dom Nik,

          Thanks for your feedback. Please find the answer inline.

    Is this related to the new fast-path feature?

    Yes, This issue already identified and tracked using Jira id NC-51957 which is fixed in upcoming next v18 release.

    What could be the reason for the failure?

    Your XG firewall ethernet driver is not supported fast-path feature.Please share ethtool -i <your interface name> output.

    Is the fast path feature available to SW appliances / virtual machines/home users etc.?

    It depends on the ethernet interface driver.

  • 0 in reply to Apurv Patel

    Hi Apurv,

     

    I am getting this also from my software firewall, but this time not virtual. here is the output from the ethtool

     

    SFVH_SO01_SFOS 18.0.0 EAP3-Refresh1# ethtool -i Port2
    driver: r8168
    version: 8.046.00-NAPI
    firmware-version:
    expansion-rom-version:
    bus-info: 0000:03:00.0
    supports-statistics: yes
    supports-test: no
    supports-eeprom-access: no
    supports-register-dump: yes
    supports-priv-flags: no

     

    is this going to be supported?

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

Reply
  • 0 in reply to Apurv Patel

    Hi Apurv,

     

    I am getting this also from my software firewall, but this time not virtual. here is the output from the ethtool

     

    SFVH_SO01_SFOS 18.0.0 EAP3-Refresh1# ethtool -i Port2
    driver: r8168
    version: 8.046.00-NAPI
    firmware-version:
    expansion-rom-version:
    bus-info: 0000:03:00.0
    supports-statistics: yes
    supports-test: no
    supports-eeprom-access: no
    supports-register-dump: yes
    supports-priv-flags: no

     

    is this going to be supported?

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

Children
Unfiltered HTML