Hi i have a wifi separate zone for security cams.
I cant ping or connect from LAN to the separate zone wifi network.
It was working in v17.
Check out some Screenshots.
The firewall rule should work but it doesnt.
Weird that no firewall log entries are logged, too.
Thanks for any help.
Thanks for your feedback, I will send you PM for more details purpose.
That is a rule for one direction.
Where is the return rule to allow the WifiRestricted traffic back to the Lan?
It may be included in another rule, but if you upgraded from V17 to V18 the return rule may have been lost.
I did notice that my initial V18 upgrade lost some rules.
Gavin Daniels. DipIT(Networking)
Thanks for device access and live debug session.
We are tracking this issue with Jira ID NC-55640.
That is not the problem, i have added a rule for the other direction, too.I think it must be a bug...
Can you please post your other rule.
here is the other direction.
Just set up a test, and actually seeing what I expect is the same result as you.
Created new 'LAN' Zone for Wifi
Created Wifi SSID as new zone, client isolation disabled.
Created firewall rules for Lan to Wifi Zone and seperate rule for Wifi Zone to Lan
DHCP for Wifi Zone done on Sophos
All services allowed
From the Wifi devices (ipad, Iphone, Laptop) I can ping each other, and I can ping anything on the LAN (PC, NAS, ECT)
From the Lan devices or the Sophos Firewall I cannot ping a device on the Wifi Zone
I also tried setting the Wifi setup back to the default WIFI zone, still no go.
I believe that the Wifi Zone is right, because I have a seperate WIFI Zone to WAN rule, and after changing the WIFI SSID to the default WIFI zone, then I lost internet access on the Wifi Devices.
So I will agree with you, an introduced bug in V18
Doesn't make any difference if it is a WIFI or seperate zone.
You are correct, I tested that as well.
And it is not an issue related to V17 migration, as I reset my XG125 to factory defaults after EAP3R1 and have set it up completely from scratch. No backup import.
Hi Ian, so you can reproduce the problem as well? Is there any workaround this?