[Feedback] Performance 1Gbit Cable Ger.

Hello to all,

I just did a little performance test and have to say this firmware rocks in terms of network speed.

 

How does my network look?

 

PC--->XG--->SW--->Router--->ISP--->Internet

 

The other part I am sadly double NATed... The main Router is a Firtzbox Cable Modem from the ISP (Ill change that in future with a modem from TC4400-EU with Docsis3.1/3.0 support)

In-between my Router and the XG is my DNS Server (Pi-Hole) and all works well. If the Pi-Hole misses something the XG will get it and vice versa.

But back to topic the performance compared to the current 17MR9 is huge! (3x more performance than usual)

The other part is Bufferbloat got very good.

Protections active are: AV - WEB - APP - IPS - NAT with HTTP/s Decryption

The Web Protections has the Default Rules (modified for my needs)

APP Rules are High Risk (Level 4 - 5) 

IPS Rules lantowan general

Scan HTTP and Decrypt HTTPS Traffic plus Scan FTP Traffic

Thats all for now. 

Best regards

Eli.

  • How did you disable all these services permanently?

    For example Enhancedappctr.

  • Hello  

    to disable those services there is a little trick to it:

    1. Enable Cloud Synchronization

    2. Connect and Authenticate the Firewall to your Sophos Central Account

    3. Disable "Security Hartbeat" and "Advanced Application Control"

    4. Done

    Example:

    The other Services I disable over at "System Services" -> "Services"

    Last but not least I disabled modules like the SIP Helper:

    1. Logon to your Firewall with SSH
    2. Choose 4
    3. Run the command "system system_module show" to list all modules and afterwards "system system_module sip disable"
    4. Run the command "system system_module show" to make sure it is "not loaded"
    5. Done

    That is all what I did to unload all the stuff I do not need!
    But be careful some services are essential if you want to take full advantage of "Synchronized Security" - "Intercept X Advanced" since I do not have that I'll shut everything down to minimize load.

    Never forget Test your Firewall protection features with: http://sophostest.com/ to see that ATP - WEBfilter - AV and so on work as intended.

    Best regards

    Eli.

  • Hello Sophos Community,

    time for a update 21.12.2019

    What happun...? 

    - Updated the Firmware via Sophos Central of my Firewall appliance (EAP3) and it went thru with no issues. (Happy)

    - Rebooted appliance with no issues. (Still Happy)

    - Made some Benchmark Tests with www.dslreports.com / www.speedtest.net / MyISP with "iftop -i [WAN Interface]" and "psmon" that is were I got (sad)

    Why...?

    - The performance degraded about 50% with no changes made to settings!

    (Cable = Shared-medium) Can not get over 450... Down - Upload still good! 

    My Question:

    - Was something added or activated?

     

    Best regards

    Eli. 

  • Now your throughput seems realistic for a J2900 on v18 EAP. It's getting the same throughput as my old J1900 with multiple connections.

    I believe there has something wrong with your setup before.


    If a post solves your question use the 'Verify Answer' button.

    Ryzen 5600U + I226-V (KVM) v21 GA @ Home

    Sophos ZTNA (KVM) @ Home