Thread Info
  • State Suggested Answer
  • +2 person also asked this people also asked this
  • Replies 24 replies
  • Answers 1 answer
  • Subscribers 9 subscribers
  • Views 6871 views
  • Users 0 members are here
Options
Suggested

[Feedback] Performance 1Gbit Cable Ger.

Eli

Hello to all,

I just did a little performance test and have to say this firmware rocks in terms of network speed.

 

How does my network look?

 

PC--->XG--->SW--->Router--->ISP--->Internet

 

The other part I am sadly double NATed... The main Router is a Firtzbox Cable Modem from the ISP (Ill change that in future with a modem from TC4400-EU with Docsis3.1/3.0 support)

In-between my Router and the XG is my DNS Server (Pi-Hole) and all works well. If the Pi-Hole misses something the XG will get it and vice versa.

But back to topic the performance compared to the current 17MR9 is huge! (3x more performance than usual)

The other part is Bufferbloat got very good.

Protections active are: AV - WEB - APP - IPS - NAT with HTTP/s Decryption

The Web Protections has the Default Rules (modified for my needs)

APP Rules are High Risk (Level 4 - 5) 

IPS Rules lantowan general

Scan HTTP and Decrypt HTTPS Traffic plus Scan FTP Traffic

Thats all for now. 

Best regards

Eli.

Parents
  • 0

    Hi,

     

    Thanks for making this post, can you share some information about your setup such as:

    • CPU usage in idle and in high load.
    • Also what's the CPU Load average.
    • You're using Web Proxy or DPI?
    • In high load, such as speed test, can you go to the shell and execute "top" and take a picture on what's being mostly used in CPU.
    • Do you use VLAN in XG?, if so, what's the speed between inter-vlan traffic.

     

    It's interesting to see you can get 800mbit/s LAN=>WAN with a J2900.

     

    Thanks,

    If a post solves your question use the 'Verify Answer' button.

    Ryzen 5600U + I226-V (KVM) v21 GA @ Home

    Sophos ZTNA (KVM) @ Home

Reply
  • 0

    Hi,

     

    Thanks for making this post, can you share some information about your setup such as:

    • CPU usage in idle and in high load.
    • Also what's the CPU Load average.
    • You're using Web Proxy or DPI?
    • In high load, such as speed test, can you go to the shell and execute "top" and take a picture on what's being mostly used in CPU.
    • Do you use VLAN in XG?, if so, what's the speed between inter-vlan traffic.

     

    It's interesting to see you can get 800mbit/s LAN=>WAN with a J2900.

     

    Thanks,

    If a post solves your question use the 'Verify Answer' button.

    Ryzen 5600U + I226-V (KVM) v21 GA @ Home

    Sophos ZTNA (KVM) @ Home

Children
Unfiltered HTML