Thread Info
  • State Not Answered
  • Replies 4 replies
  • Subscribers 6 subscribers
  • Views 1236 views
  • Users 0 members are here
Options
Suggested

Changing a Physical port configuration deletes Vlans configured on the port

GavinDaniels

Hi

I configure a physical port on the Sophos with a dummy zone and IP address, and attach a Vlan using a PPPOE connection for the ISP connection.

If I go back and edit the Physical port settings, like change the MTU or MSS sizing, I get the message about unbinding the port, and upon the configuration change, the Vlan entry is deleted and requires re configuration.

Editing the physical port parameters should not delete this.

Parents Reply
  • 0 in reply to lferrara

    Hi, 

    the current behavior is, if you unbind a interface (for example from LAN to "none") the VLANs on this interface will be deleted. 

    That´s currently under investigation to change this. 

    But if you change the configuration of the physical interface, the VLANs should persist. 

    Tested it with a dummy interface, my VLAN stayed after updating the physical interface (for example MTU Size Update). 

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML