Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Replies 13 replies
  • Subscribers 6 subscribers
  • Views 2667 views
  • Users 0 members are here
Options
Suggested

BUG - SSL/TLS service selection does not list all services

rfcat_vk

Hi folks,

I am setting up a new rule to split some of my IoT rules into https scanning and using SSL/TLS to scan th none standard ports.

In the firewall rule i can see and select all the IoT services but in the SSL/TLS rules I cannot see all of IoT services. I checked another rule by trying to add the service to ensure it was not a last man failed to make the list issue, but no, it is in the middle of the list.

I don't want to attempt to create the service again, so this is a major bug.

 

Ian

Parents Reply Children
  • +1 in reply to rfcat_vk

    Actually, UDP is not possible to pick up in SSLx. 

    Because most likely UDP will not use TLS/SSL (or only in very rare cases). 

     

    If you select a multi use protocol (TCP and UDP), SSLx will only pick up TCP and leave UDP. 

    But actually i found a bug in this recreation. 

     

     Could you please create a new SSLx Rule, create a UDP only Service (Test UDP - Port 12345) and save this rule.

    If you reopen this rule, the Service is empty. 

     

     

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    Hi LuCar Toni,

    thank you for the explanation. I have had to reduce my testing of my IoT devices through the SSL/TLS process because two of them fail to connect when scanned. The Fronius-a and my weather station.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML