This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Web Protection Netzwerk sperren

Hallo zusammen

 

Ich befasse mich gerade mit der Sophos UTM 9 Home und habe da eine Frage zum Konfigurieren des WEB Protection.

Folgendes ist vorhanden: WAN, LAN1, LAN2

Bisher kommen beide Netze LAN1 und LAN2 ins Internet. Nun möchte ich, das LAN2 nicht ins Internet kommt und habe

das Web Protection(Webfilter) eingeschaltet und das LAN1 zu den "Zugelassene Netzwerke" hinzugefügt. Trotzdem

können jetzt noch PC's aus dem LAN2 ins Internet. Muss ich da noch irgendwas Konfigurieren?

 

Gruss Sascha



This thread was automatically locked due to age.
Parents
  • Hallo Sascha,

    Erstmal herzlich willkommen hier in der Community !

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    When you first set this up, the Installation Wizard created a firewall rule like 'Any -> Web Surfing -> Any : Allow'.  You will want to change that.  See #2 in Rulz to understand why this can work the way you want it to work.

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hallo Sascha,

    Erstmal herzlich willkommen hier in der Community !

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    When you first set this up, the Installation Wizard created a firewall rule like 'Any -> Web Surfing -> Any : Allow'.  You will want to change that.  See #2 in Rulz to understand why this can work the way you want it to work.

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data