Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Extremly frequent DHCP renews overloads the XG firewall slowing down all traffic.

It seems that the DHCP server configured on the XG125 is renewing DHCP adresses so frequently that it takes all resources on the XG125.  

If I check the logs I have 52 pages of renews of the same IP adress:

 

If I remove the device with the IP the problem is temporary solved. The internet works again and other devices can join the network again. But after a while (2 days) the same thing happens again on a different PC with a different IP adress.

I can see that the XG125 is under much more load than it was initially. I didn't change anything in the configuration. To me it seems like a bug in the DHCP server, does any one else have this kind of problems?

My DHCP settings:



This thread was automatically locked due to age.
Parents Reply
  • Currently 13 devices assigned an IP from the DHCP pool. 

    Previously as you can see on the first screenshot in the post the renew on the same IP was 2 times per second. So my 52 pages log is about 1 minute timeframe in total.

     

    Currently the network behaves much better with the renew set to 30 days. But still IP adresses are getting renewed within 15 min, how is this possible?

     

Children
  • This will depend on your device NIC settings, if you have power saving when idle enabled, then when it is no longer idle will request a new address.

    My guess.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v20.0.2 MR-2

    If a post solves your question please use the 'Verify Answer' button.