Hallo,
ich habe heute das Softwareupdate auf die UTM 9.500-9 durchgeführt.
Das System läuft auf einer APU3a4 und lief mit der WLAn Karte vorher problemlos. Seit dem Update geht nichts mehr.
Die Hardware wird anscheinend erkannt:
01:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
02:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
03:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
04:00.0 Network controller [0280]: Qualcomm Atheros AR9580 Wireless Network Adapter [168c:0033] (rev 01)
Jedoch wird der Link als aus bzw. down angezeigt:
wlan1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc hfsc state DOWN group default
Wireless Protokoll:
2017:05:09-21:12:27 home hostapd: Configuration file: /var/run/hostapd-phy0.conf
2017:05:09-21:12:27 home hostapd: nl80211: 'nl80211' generic netlink not found
2017:05:09-21:12:27 home hostapd: Failed to initialize driver 'nl80211'
2017:05:09-21:12:27 home hostapd: hostapd_free_hapd_data: Interface wifi1 wasn't started
2017:05:09-21:12:27 home hostapd: hostapd_free_hapd_data: Interface wifi0 wasn't started
Anscheinend wird der Treiber nicht geladen.
Kann mir jemand helfen oder muss ich zurück auf die 9.4 gehen?
Vielen Dank.
This thread was automatically locked due to age.