Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 38 subscribers
  • Views 9421 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port von SSL VPN und User Portal

TerminatorTerminator
Standardmäßig haben beide den Port 443

können diese beiden System den gleichen port gleichzeit haben oder muss ich einen der beiden ändern?


This thread was automatically locked due to age.
  • 0
    Funktioniert so. Was nicht geht, ist zusätzlich noch ein Port-Forwarding (DNAT) für 443 (z.B. für internen Web-Server).

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0
    Du kanst, wenn du das möchtest den Port 443 für das User Portal umsetzen nach 1443. Damit kanst du in dien Router die Port 443 forwarden nach ein internen Web-Server. 

    (p.s. mein Deutsch ist nicht so gut)
Unfiltered HTML