Hallo Leute, [:)]
habe mir kurzfristig folgendes Gerät bei ebay geschossen:
ARinfotek Teak 3035L ----------www.arinfotek.com/product.php
Hat schon jemand Erfahrungen beim Aufsetzen einer Astaro auf diese Hardware? Von den Features müsste ich wohl noch etwas RAM nachlegen und eine HDD verbauen. Reichen dafür 20GB?
Habe hier noch mal die Features aufgelistet. Ich dachte, bei einem Preis von 126€ kann nicht viel schiefgehen, hoffentlich, und ich habe eine Firewall mit akzeptablen Stromverbrauch. 19" war nicht so entscheidend.
Vielen Dank schon mal im Voraus!
MfG
Andreas
Features:
‧ 1U Rack Mount Network Security Platform
‧ Intel Atom N270 1.6 Ghz Processor , 533 Mhz FSB
‧ Intel 945GSE North & ICH7-M South Bridge Chipset
‧ On board DDR2 memory + SODIMM , Up to 1.5 GB w/o ECC
‧ Build-in 4 ports GbE LAN + 1 port FE LAN
‧ Pre-setting By-pass when power ON / OFF
‧ Optional support PCI-32 expansion slots
‧ One CF storage slot
‧ Internal 2.5 '' or 3.5'' SATA Drive bay
‧ Fanless Platform
General Specifications:
Ethernet:
‧ Four ports of PCI-E I/F Intel 82574L Giga bit LAN controller
‧ One port of PCI I/F Intel 82551ER FE LAN controller
Pre-Setting By-Pass Function when Power ON / OFF:
‧ Two ports of Giga bit LAN which Support LAN By-Pass Function
‧ LAN By-Pass Function Enable / Disable Pre-Set by Bios when Power On or OFF
System Management Interface:
‧ One port of DB-9 Serial Console at the Front Panel
‧ Two ports of USB 2.0 at the Front
This thread was automatically locked due to age.