ich habe folgendes Problem mit einer ASG 220: Nach dem Update auf 8.203 bekomme ich die Site2Site-Verbindung nicht mehr aufgebaut. Ebenso habe ich festgestellt, dass die Ressourcenauslastung extrem gestiegen ist:
top - 20:43:29 up 26 min, 1 user, load average: 2.06, 2.07, 1.64
Tasks: 155 total, 1 running, 151 sleeping, 0 stopped, 3 zombie
Cpu(s): 61.6%us, 38.4%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 990800k total, 954964k used, 35836k free, 7440k buffers
Swap: 1052248k total, 335380k used, 716868k free, 106472k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
6493 root 20 0 172m 33m 1820 S 195 3.5 26:51.64 cssd
4975 root 20 0 2580 984 620 S 1 0.1 0:15.94 lcd4linux
6692 root 20 0 51644 30m 3432 S 1 3.2 1:35.93 acc-agent.plx
6378 root 20 0 6848 2360 956 S 0 0.2 0:05.16 syslog-ng
6625 httpprox 20 0 1189m 239m 3320 S 0 24.8 0:15.02 httpproxy
12684 root 20 0 47672 17m 2612 S 0 1.8 0:00.45 confd.plx
1 root 20 0 1816 540 512 S 0 0.1 0:00.40 init
Hier steht CPU-Auslastung von 61.6%. Lt. WebUI ist seit dem Update die CPU auf 100%. Also irgendwas scheint falsch gelaufen zu sein.
Lt. Up2Date-Log ist die 8.203 erfolgreich installiert. Einen Neustart habe ich gerade gemacht. Sofort nach dem Neustart steigt die CPU-Auslastung wieder auf 100%.
Im Support-Bereich sind mir noch diese Prozesseintraege aufgefallen:
root 11477 0.0 0.0 0 0 ? Z 20:31 0:00 \_ [aua.bin]
root 9591 0.0 0.0 0 0 ? Z 20:19 0:00 \_ [iplocator.plx]
root 6493 118 2.0 176548 20252 ? Ssl 20:17 37:47 /usr/bin/cssd -d
Wäre nett, wenn mir jemand sagen kann, ob das "normale" Einträge sind. Iplocator ist, denke ich, zur Standortermittlung der IP-Adressen, also wohl Bereich Firewall -> Country-Blocking, oder liege ich da falsch?
die anderen sagen mir so nichts. Aber "CPU 118%" schaut für mich nicht gut aus. Ebenso grundsätzlich alles, was ist. Hat das mit dem 2. Problem VPN evtl. zu tun?
Gruß
LoD
Edit: defuct habe ich Hier gefunden. Das ist also soweit i.O. Bleibt "nur" die extreme CPU-Auslastung sowie die S2S, die ich mittlerweile komplett neu eingerichtet habe, aber dennoch nicht funktionieren will. Beide Geräte (ASG220 + PC mit Home Edition) auf 8.203
This thread was automatically locked due to age.