Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Anfänger Config Webserver über dns

Hallo, hab mich vor kuzem für die Astaro entschieden, allerdings hab ich ein paar kleine Konfigurations Probleme.
Ich habe einen Webserver hier stehen und möchte den über DynDNS von außen erreichen, was allerdings noch nicht funktioniert.
Folgende Einstellungen habe ich unter Nat erstellt:

Datenquelle: any
Dienst: http
Ziel: Webserver
-- Volles NAT (beide)
Ziel: Webserver
Dienst: http
Quelle DSL Lan
Dienst http

Entweder es passiert gar nichts, oder ich bekomme eine Rückmeldung von der Astraro "Connection to server timed out"

Kann mir bitte jemand helfen, wäre mir sehr wichtig das das wieder geht
THX


This thread was automatically locked due to age.
Parents Reply Children
  • habe mich nun genau an die Anleitung gehalten, leider ohne Erfolg.
    Das Liveprotokoll bringt folgende Ausgabe:
    19:44:46  Default DROP  TCP 
    192.168.1.6  :  49455
    → 
    84.148.92.112  :  80

    [SYN]  len=52  ttl=128  tos=0x00  srcmac=00:00:00:00:00:00  dstmac=00:30:84:78:4b:9f
    19:44:49  Default DROP  TCP 
    192.168.1.6  :  49455
    → 
    84.148.92.112  :  80

    [SYN]  len=52  ttl=128  tos=0x00  srcmac=00:00:00:00:00:00  dstmac=00:30:84:78:4b:9f
    19:44:55  Default DROP  TCP 
    192.168.1.6  :  49455
    → 
    84.148.92.112  :  80

    [SYN]  len=48  ttl=128  tos=0x00  srcmac=00:00:00:00:00:00  dstmac=00:30:84:78:4b:9f
  • Das ist von innen nach "draußen" und dazu verwendet man die HTTP Proxy.  Oder man macht eine Paketfilterregel: 'Internal (Network) -> HTTP -> Any : Allow'.

    MfG - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA