Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 789 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Slow performance behind firewall

Jago

Hi, I purchased a used XG 115 Rev. 2 firewall and installed Sophos Home Edition so I can use it as a perimeter firewall at home.
My internet connectivity is FTTH 1 Gbps/300 Mbps. If I connect directly to the ISP router by running a speed test I get 900 Mbps/280 Mbps. If I connect behind the firewall, while disabling any firewall controls (DPI, IPS, AV, etc...) I can never get more than 550/250 Mbps. Why? I also replaced the 4GB RAM bank with an 8GB bank (even though I know the Home Edition limitation is 6GB). What else can I do to be able to use this firewall satisfactorily? During the tests, only my PC was connected to the firewall's LAN, If I connect the entire home data network I think that the performance will be even lower...

Thanks!

Bye



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    you appear to have hit the performance limit of the xg115. My Rev3 does slightly better on the 1000/50 fttp link with around 600-650 using my current configuration. The number of users should not have any significant affect on throughput.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Hi,

    you appear to have hit the performance limit of the xg115. My Rev3 does slightly better on the 1000/50 fttp link with around 600-650 using my current configuration. The number of users should not have any significant affect on throughput.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML